Wolfgang Puck BDFR0070 Operations Instructions Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Using Your Timer
Your countdown timer features a Power Button to conserve the battery,
and a + / - adjustment which allows you to adjust the time in one minute
increments up to 60 minutes. The timer is also removable from your
deep fryer so you can carry it with you. To remove the timer from the
housing, grasp the edge of the timer and pull straight out. It has an
audible beep to alert you when the set time has expired.
Your timer is shipped with a temporary battery protector which prevents
draining of the battery during shipment. Before your first use remove the
battery cover on the back of the timer by sliding it down. Remove the
plastic protector from the timer and place the battery and cover back on
the timer.
To turn your timer on press the Power button and the timer will display
00. Use the + button to increase the time in one minute increments and
the – button to decrease the time. You can hold the + or – button in to
scroll the time at a faster rate.
Once the desired time has been selected press the power button and
the set time will blink twice and your timer will begin counting down in
one minute increments. If you do not set a time and press the power
button the timer will automatically turn off in 30 seconds from the last
button press.
When the timer is down to the last minute the display will change to
seconds. Once time has elapsed the timer will begin to beep. Press the
Power button to turn the beep off.
Should your timer require a replacement battery only use a standard
AG13 alkaline battery.
1
2
3
4
5
Care & Cleaning
Warning:
Do not attempt to clean your Fryer or drain the oil while either
the Fryer or the oil is hot. Allow unit to completely cool.
Before cleaning, unplug the cord from the wall outlet first, and
then from your Deep Fryer and wait for the Deep Fryer to cool
completely. Remove the Control Panel with heating element from
the base by lifting vertically. Never immerse the Control Panel
in any liquid. Clean the heating element with hot, soapy water
and be careful not to wet the control panel. Wash the Lid, Frying
Basket and Oil Pot in warm, soapy water and dry thoroughly.
Clean the exterior of the Control Panel with a slightly damp cloth.
Wipe the Deep Fryer housing with a damp cloth. Always ensure
that all components are dried thoroughly, as any residual water
will cause spattering of oil.
Important:
Do not immerse the Deep Fryer Control Panel or Power Cord in
water or other liquid. Do not place any parts of the Deep Fryer in
your dishwasher. Always hand wash as described above and dry
thoroughly.
14 15
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Comments to this Manuals

No comments