Wolfgang Puck BIBC2020 Operations Instructions download pdf (Page 5)

7 8

Suggested Uses

Your Immersion Blender comes with a fixed multi-purpose blade,

and an extra long shaft which allows the unit to be used in deep pots, or

tall containers.

Caution: Blades are sharp. Handle with care.

Functions Speed

Beat cream, whip egg whites,

puddings, sauces, frostings and

other airy, foamy mixtures. When

using, move Blending Rod up and

down to draw air in. Use a tall,

narrow container for best results

when foaming milk, making cream

and whipping egg whites.

Mix and stir shakes, drinks, omelet

batters, sauces and emulsions. Use

for pancake batter, gravies and

dressings.

Cut, chop, and crush raw or cooked

meat and hard vegetables.Grind

cooked meat for use in recipes such

as casseroles or chicken salad.

Chop, crush, and mash vegetables,

and fruit for baby food, soups and

sauces.

1 - 3

3 - 4

5

3 - 5

Assembly and Use

of Blending Rod or Wire Whisk

1 Ensure the Motor Base is unplugged.

Attach Blending Rod or Wire Whisk to

Motor Base by inserting Motor Base into

Blending Rod or Whisk and pressing

straight down until you hear a click. (see

figure 1)

2 Place food in suitable container for mixing.

You can use the beaker provided with this

unit or a suitable bowl, or stockpot. For

best results solid foods should be no larger

than 1/2" cubes.

3 Plug into 120-volt 60 Hz AC only outlet.

4 Immerse the Blending Rod or Whisk into

your ingredients. Turn the speed selector

to “1”, press the top Pulse Button to begin

blending; then gradually increase speed,

as needed. (see figure 2) Slowly move the

Rod up, down and sideways through the

food . Note: Never lift the Blending Rod

attachment out of your ingredients while

the unit is running to avoid splatter of

your food.

Note: At any time during the blending

process, you can press the Turbo Button

(bottom black button) to increase the

blender to its maximum speed. You cannot

adjust the speed using the Turbo Button.

Speed adjustment is accomplished only

when using the top Pulse Button.

6 Do not operate the motor continuously

for more than one minute when using

the Blending Rod or Wire Whisk, simply

pulse the selected speed to your

desired consistency.

7 When you are finished, simply release the

Pulse Button, unplug the Motor Base and

press the two release buttons on the Motor

Base to remove the selected attachment.

figure 1

figure 2

2020ImmBlderManual 2/19/10 4:28 PM Page 7

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments